How Are Oba Tents Set Up?
Setups on Iron Scaffolding
The setup of Oba tents and other tent models generally consists of two parts. These are setups on iron scaffolding and wooden poles. When Oba goat hair tent products are sewn according to special requests, i.e., measurements and dimensions, and sent to you, they usually arrive in two pieces. One of these is the upper part of the tents, and the other is the surrounding part. For this reason, the setup and assembly processes must be carried out by experts and experienced individuals.
Setup on Wooden Poles
Setting up on iron scaffolding is quite simple. The upper parts of the Oba goat hair tent products, which come in two pieces, are laid out completely on the ground. Using the thin strips of webbing as a basis, the necessary adjustments are made so that they are at the bottom parts of the tents. The webbing is then tied through the holes at their ends, the ropes are thrown over the scaffolding to the other side, and then hung from there. After ropes are taken from all ends of the webbing, the tent is stretched evenly. The part sent for the surroundings is started from one side of the tents and is rotated around them, stretching it well. Setups on wooden poles are generally very cumbersome, and the upper parts of the tents, sent in two pieces, are laid out completely on the ground. The webbing, sewn in thin strips, is used as a basis, and this webbing is adjusted so that it is at the bottom parts of the tents. In Oba goat hair tent products, poles are nailed to the tent at the bottom parts of each tied rope, and the poles are fixed to the tents. This is how the tents are set up, but it is always recommended that the setup process be carried out by expert and experienced individuals.
